How To Install M2 SSD

Wondering what an m2 SSD is, and how it can benefit you? Then let’s take a closer look!

How to install m2 SSD

You can trust PC GuideOur team of experts use a combination of independent consumer research, in-depth testing where appropriate – which will be flagged as such, and market analysis when recommending products, software and services. Find out how we test here.

Last Updated on

M2 SSD is a new generation solid-state drive (SSD), and it is claimed that this offers faster performance and a longer lifespan compared to other SSDs.

If you are looking to upgrade your system and install an m2 SSD, we have all of the information you need to proceed.

What Is An M2 SSD?

An m2 SSD is a small form factor SSD that can be used as a replacement for the hard disk drive in your computer.

SSDs are designed to fit into existing slots on motherboards or add-on cards, and offer much better performance than traditional hard drives, with greater speed and power available.

Why Use An M2 SSD Instead Of A Regular HDD?

An m2 SSD offers a number of benefits over a standard HDD, including:

Faster Boot Time

One of the main advantages of SSDs in general, and m2 SSDs in particular, is that they have a much faster boot up time compared to traditional HDDs.

Increased Reliability

Another advantage of SSDs is that they are far more reliable than traditional HDDs. The key reason behind this is that SSDs do not rely on mechanical parts like platters and moving parts to store data.

Instead, they use flash memory chips that are non-volatile, meaning that they retain data even when the power supply is turned off.

Improved Multitasking

Because SSDs don’t have mechanical components, they also make multitasking easier. You can easily switch between applications without waiting for programs to finish loading.

Noise Reduction

Because SSDs are quieter than traditional HDDs, they reduce noise levels in your computer. This makes it easier to work while others around you aren’t aware of what you’re doing.

1

How Do I Install An M2 SSD?

Installing an m2 SSD is relatively simple. All you need is some basic tools and knowledge about your motherboard.

We’ve provided step-by-step instructions below so you can follow along with us.

Step

1

Prepare Your Motherboard

Before installing your m2 SSD, you first need to prepare your motherboard. To do this, you need to remove the cover from your motherboard and locate the SATA connector.

Once you’ve found the SATA connector, you should disconnect it from its corresponding port on the motherboard.

Next, you need to open up the back panel of your motherboard. On most motherboards, this can be done by removing four screws located underneath the rear panel.

After opening up the back panel, you should carefully remove the two screws holding down the SATA connector. Now, you can pull out the SATA connector.

Step

2

Install Your M2 SSD

Once you’ve removed the SATA connector from your motherboard, you can now start installing your m2 SSD.

First, you need to insert the SATA connector into the corresponding slot on your motherboard.

Next, you need to slide the m2 SSD into place. When you’ve installed the m2 SSD, you can close up the back panel of the motherboard.

Step

3

Connect Your Hard Drive

After installing your m2 SSD and closing up the back panel, it’s time to connect your hard drive.

To do this, simply plug your hard drive into the SATA connector. If you want to ensure that everything works properly, you can test your hard drive before powering on your PC.

Step

4

Power On Your PC

After connecting your hard drive, it’s time to power on your PC. Once you’ve powered on your PC, you should notice that your hard drive has been replaced with your m2 SSD.

Final Thoughts

Adding an m2 SSD to your computer or laptop can be a great way to improve user experience, boost speed and power, and allow you to make the most of your devices.

Kevin is the Editor of PC Guide. He has a broad interest and enthusiasm for consumer electronics, PCs and all things consumer tech - and more than 15 years experience in tech journalism.