Last Updated on
SSD or Solid State Drive is a storage device that uses flash memory instead of spinning disks like Hard Disk Drives.
They have become increasingly popular over the last few years, largely due to their power, speed, and reliability.
In addition, SSDs offer faster access time and better performance compared to HDDs.
SSD is a great choice for those who want to upgrade their system because they offer higher speed and reliability – but just how do you go about completing the upgrade?
We have put together everything you need to know in just a few short steps.
What Is an SSD?
SSD stands for a solid-state drive. It is a type of storage media that has no moving parts and it stores data on chips rather than magnetic platters.
The advantage of this type of storage is that there are no moving parts to wear out, making them more reliable than traditional hard drives.
The downside to SSDs however is that they are much slower than HDDs. This means that an SSD will take longer to boot up your computer, load programs, and open files.
However, once the operating system is loaded, applications start running almost instantly.
The Benefits Of Upgrading To An SSD
There are several reasons why you should consider upgrading to an SSD. Here are some of the most common:
Faster Boot-Time
If you are looking to improve the speed at which your PC boots up then an SSD is a good option.
Because SSDs do not use any mechanical components such as hard disk drives (HDDs), they can be accessed very quickly.
Better Performance
An SSD can perform many times faster than a standard hard disk drive. This means that when you launch your favorite program, it will start up quicker and run smoother.
Improved Reliability
SSDs tend to be more reliable than the alternatives, so if you’re worried about damaging your old drive, then an SSD is a safer bet.
More Space
If you are looking to increase the amount of space available on your computer, then an SSD is definitely worth considering.
With an SSD, you can store all of your important documents, photos, and music without worrying about filling up your hard disk.
How Can I Install An SSD?
Installing an SSD is easy, but you may need some help along the way.
If you don’t want to spend hours getting into your computer’s innards, we’ve got you covered. Follow these simple instructions to get started.
Step
Check Your Motherboard Supports SSDs
Before you begin, make sure that your motherboard supports SSDs. You can check whether your motherboard supports SSDs by going to the manufacturer’s website.
To find the model number of your motherboard, look inside the box where you bought your computer.
Step
Remove Computer’s Side Cover
Remove the side cover from your computer – in many cases, this will simply slide off, but you may need to remove screws.
Step
Remove Hard Drive
Now, remove the old hard drive from your computer. Make sure that the power supply is disconnected before removing the hard drive.
Step
Put In SSD Drive
If your device has a space for an SSD drive, simply slot the new drive in and screw this in place.
If your device does not have a space, you will need to purchase a bracket and screw this into place, before adding the SSD drive.
Step
Plug SATA Cable
Plug the SATA cable into the SSD drive.
Step
Cover Back Computer And Reboot
Place the cover back on your computer, and then reboot your computer and follow the on-screen instructions.
Final Thoughts
Upgrading to an SSD can have a hugely positive impact on your laptop or computer, but does require a little technical prowess and know-how. By following our steps above, you can enjoy faster speeds and more efficient working.
