Verizon router blinking white – meaning, causes, and how to fix it

Make the white light stop blinking with these methods!

Verizon router blinking white

You can trust PC GuideOur team of experts use a combination of independent consumer research, in-depth testing where appropriate – which will be flagged as such, and market analysis when recommending products, software and services. Find out how we test here.

Last Updated on

If you’re facing the Verizon router blinking white issue and want to learn how to fix it, we’ve got you covered.

While a stable white light means that everything is running smoothly, a blinking white light on the Verizon router indicates that the device is booting up. But if the blinking doesn’t stop after two minutes, it means there’s a problem with your connection or router. In this case, you need to troubleshoot the issue yourself.

This is where we come in. Through this guide, we’re going to help you understand the possible causes of the blinking white light and how you can fix it through a number of methods.

Quick answer

A blinking white light is most likely a network issue, but could be to do with your router.

You can troubleshoot with a few simple steps and check network status pages to identify the cause.

If all else fails, replacing your Verizon router is super straight-forward, and you can find our top pick below.

Why is your Verizon router blinking white?

The white light could be blinking because of a network error or a software/hardware-related problem in your device. Here are some possible causes behind the white blinking light on Verizon router.

  • Network issues
  • Ongoing maintenance
  • Local outage
  • Outdated firmware
  • Overheating or overloading
  • Temporary bug or glitch

How to fix Verizon router blinking white issue

Here are some methods that can help eliminate the blinking white light issue on Verizon router.

Step

1

Check if Verizon is down

The flashing white light might indicate a Verizon service interruption, which could be due to a local outage in your vicinity or Verizon performing server maintenance. In either case, there isn’t much you can do except wait it out. You can stay updated with the latest situation by checking the official server status page of Verizon.

Step

2

Perform a power cycle

A power cycle can help eliminate a temporary bug or glitch that may be causing the blinking white light to appear on the Verizon router. 

Here’s how to do it.

  • Turn off your Verizon router.
  • Take out the power cable from the router and the power outlet to cut off the power.
  • After 45 seconds, plug the cable back in to the router and power outlet.
  • Wait for two or three minutes and then turn on the router again.

It will take a few minutes for the router to boot up properly. If the blinking light was due to a bug or glitch, it should hopefully stop blinking once the router has restarted.

Step

3

Update your router

If your Verizon router is blinking white, it may be because of an outdated software. Routers need the latest firmware update to operate smoothly, and trying to run them on an older software version is something you should avoid.

To update your Verizon router, follow these steps.

  • Go to My Verizon either via the website or mobile app.
  • Access the System Settings.
  • Check for new updates.
  • If there are pending updates, download and install them.

Don’t turn off the router while its updating as this can corrupt the files and make things even worse.

Step

4

Make sure the cable is plugged in correctly

If you recently moved your router to a new location or had to take out its power cable for some other reason, examine the router to see if it is plugged in correctly. If the cable is not plugged in properly, the router may get power but it will fail to boot up. This will result in a blinking white light on Verizon router.

In addition, make sure to carefully check the cable for any damages. If it is twisted or there’s a cut on it, it will be better to get a new cable, as the existing one may be causing the problem.

Step

5

Clean your router

You should regularly clean your router to help it operate smoothly. This is because dust and debris can make their way inside the ports and prevent the cables from connecting properly. So, take a small, soft brush and clean the insides of the port. Then, try connecting the cable again to see if the white light on Verizon router is blinking or not.

Step

6

Ensure proper ventilation

Ensure your router has adequate ventilation by placing it in an open area. If it’s confined in a closed space or somewhere with limited airflow, it might overheat, leading to performance problems. To check for overheating, touch the top of the router. If it feels hot, power it off and relocate it to a better-ventilated spot.

Step

7

Reset your Verizon router

Resetting the router should be your last resort. This will basically help you bring back the router to its original state. 

Here is how to reset a Verizon router.

  • Take a small pin.
  • Put it inside a small hole that can be found on the back of the router.
  • Press the button inside the hole using the pin and hold it for around 20 or 30 seconds.
  • Let go of the button and wait for the reset process to finish.

Keep in mind that after the router resets, you will need to set it up again.

Step

8

Check if the router has a faulty light

In rare cases, it is possible that your Verizon router has a faulty LED light that is blinking light. To make sure this is the case, check if your router is working correctly. You can do this by –

  • Check signal strength
  • Check the internet connection and its speed

If there are no issues with your router or internet connection, then the light might be faulty. You can let it blink and wait for it to go away or ask for a replacement router. In any case, you will have to get in touch with Verizon customer service. 

Step

9

Get assistance from Verizon

If you’ve tried everything but the Verizon router blinking white issue is not getting resolved, you’ll need to seek help from professionals. For this, get in touch with the customer support service of Verizon and tell them about your issue. They may require you to send the unit to them for repair or replacement. If you’ve been using an older router, consider requesting an upgraded device. They might charge you extra for it, but the improved equipment could prove to be a worthwhile investment.

Do you need to replace your Verizon router?

If nothing seems to work then you may need to replace your router. If that’s the case, we’ve put together what we think are some of the best Verizon routers, so you can kick off your search in the best way possible.

Our top pick right now is the impressive TP-Link AX5400 WiFi 6 Router (Archer AX73), which can often be found on sale too.

Conclusion

The Verizon blinking light issue may seem difficult to fix at first but don’t panic. Instead, perform a power cycle on your router as this will cause the problem to go away if it is caused by a temporary bug or glitch. If that doesn’t work, try updating your router, check the cables, and make sure the device isn’t overheating. But if nothing works, get in touch with the Verizon support team and seek help from professionals.

Be sure to check back in with us should you encounter any other lights that you’d like to know the meaning of. We’ve listed some of the most common culprits below, and have detailed guides on how to fix them, and what they mean.