Verizon router blinking blue – meaning, causes, and fixes

Try these methods to fix the blinking blue light on your Verizon router!

Verizon router blinking blue

You can trust PC GuideOur team of experts use a combination of independent consumer research, in-depth testing where appropriate – which will be flagged as such, and market analysis when recommending products, software and services. Find out how we test here.

Last Updated on

If you’re stuck with your Verizon router blinking blue light and you can’t figure out how to make it go away, we’ve got you covered.

Usually, the blinking blue light on the Verizon router means it is in pairing mode and trying to connect to a WPS device. This happens when you press the WPS button, and the router should go back to normal solid blue (or white) light after a couple of minutes. However, if your Verizon router is stuck with the blinking blue light, there is an issue that needs to be fixed.

This is where we come in. In this guide, we will tell you several reasons why your Verizon router is blinking blue and how you can fix it.

Quick Answer

The blue light flashing on your Verizon router means that it’s looking for wireless device to connect to. However, when this light does not go away after pairing, then it indicates a problem. You can try fixing it by power cycling, restarting the router, changing the router location, updating firmware, or factory resetting. If none of this work, get in touch with the Verizon support.

Why is there a blinking blue light on your Verizon router?

Here are the possible reasons your Verizon router may be blinking blue.

  • Software glitch.
  • The WPS-enabled device is too far.
  • Damaged or loose cables.
  • Local internet outage.
  • The router is overheating.
  • Outdated firmware.

How to fix the Verizon router blinking blue light issue

You can use these methods to fix the blinking blue light issue on your Verizon router.



Check for any local outages

First of all, head over to the Verizon service outage portal or the Verizon network status page to check whether a local outage or scheduled maintenance is happening in your area. If there is any outage/maintenance going on, there is nothing you can do except wait for Verizon technicians to sort out the issue.



Power cycle your router and WPS-enabled device

A blinking blue light on your Verizon router might be due to a software glitch or bug, which can interfere with the connection between the router and a WPS-enabled device. You can clear out any software bugs with a power cycle.

  • Power off your Verizon router and unplug all cables.
  • Let it sit like this for around 5 minutes.
  • Plug everything back in and power it on.

This will resolve any glitches in the router. If the blinking blue light does not disappear, you can also power cycle your WPS-enabled device the same way.



Bring the WPS-enabled device closer to the router

If you’re trying to connect your Verizon router with a WPS-enabled device, but the router is stuck with the blinking blue light, there is a big chance your device is too far from the router’s signal coverage. For troubleshooting purposes, put the device next to the router and try again. If the connection is successfully established and the blinking blue light on Verizon router is gone, it means the distance between the device and your router is too much.



Inspect your cables for damage

Damaged, loosely connected, or strained cables can often lead to a blinking blue light on Verizon routers. Make sure all cables are correctly connected and inserted into the right ports. Additionally, inspect each cable for signs of wear, such as fraying or cuts, and any damaged cables will need to be replaced. Also, straighten out any tightly bent cables, as they can disrupt the network connection.



Relocate the Verizon router

If you have recently relocated or changed your router’s position, it might be overheating due to a lack of proper airflow. This can also happen if you’ve tucked away your Verizon router in a closed compartment. So, touch your router; if it is hot, it could be overheating. To address this, move the router to a more ventilated area with good airflow.

Regularly clean your Verizon router (including its ports) to remove any dust or debris.



Update the firmware

The Verizon router blinking blue issue can also appear if the device is running on outdated or corrupt firmware. Plus, even if there are no issues, you should still update your firmware from time to time, as it brings performance enhancements and bug fixes.

  • Log in to My Verizon using its mobile app or website.
  • Head over to System Settings.
  • Check if there are any pending updates.
  • If so, download and install all of them.

Once the firmware is successfully updated, the blinking blue light on Verizon router should be gone.

The update process can take up to 10 minutes. In the meantime, don’t power off your router or change any settings, as it can corrupt your router even more.


The blinking blue light on Verizon router can appear for anyone, even those with a new device. However, in most cases, it can be fixed by a simple power cycle. But if that doesn’t work, update the firmware, reconnect the cables, relocate the device, and factory reset it to take it back to its default settings. And if none of the methods work, get in touch with Verizon support for further assistance. If there’s a hardware-related problem and you need to replace your device, check out some of the best Verizon routers for new options.

You might also be interested in learning about the Verizon router blinking white issue and the Verizon router yellow light issue. Understanding what these two lights mean can help you quickly fix them if they ever appear on your router.